LP-11 Lift Plate – Swivel

The LP-11 Lift Plate – Swivel is a high strength unit designed for use with 3/4” or 1” bolt diameter single face or edge lift inserts. It’s made of forged steel and has a rated safe working load of 11,000 lbs with the use of the 1″ bolt and 7,700 lbs with the use of 3/4″ bolt and an approximate safety factor of 5:1.

Caution: The swivel lift plate must have full bearing on smooth, flat concrete and be securely tightened.

Note: SWL of Lift Plate requires installation of a standard flat washer underneath bolt head.

WARNINGS: Do not use any attachment bolt to fasten a swivel lift plate that shows excess wear, is bent or has any other factor that compromises its safe working load. Verify that the coil bolt is of proper length and properly penetrates the coil. Monitor the direction of pull on the lift plate’s bail. Do not permit a sideways pull. Any of the warnings, if not heeded, can result in serious injury.

Performance Data

Clear
Call 877-518-7665 or contact us for a quote.
SKU: LP-11 Category:
Precast Precast
Tilt-Up Tilt-Up
Cast-in-Place Cast-in-Place