Rapid Lift RL-24 Plate Anchor

2-Ton, 4-Ton and 8-Ton

The RL-24 Plate Anchor is designed with a plate welded to the bottom to provide high pullout strength with a low profile. This design makes the anchor ideal for face and back lifts of thin-wall units and stripping, handling and erection applications. The Plate Anchor is available in the sizes shown in the table and in plain or hot dip galvanize finish.

Reinforcing Recommendation:
Crisscross the lower plate of the anchor with four (4) 18” long #4 rebar.

NOTE: The Plate Anchor has allowable face shear loads that are equal to or greater than the unreinforced face tension loads for anchors located in a panel or concrete unit at a distance of at least 3B+A from the edges.

Performance Data