CX-44 Edge Lift Insert - Double

The CX-44 Edge Lift Insert – Double is like the single unit, but has a second insert attached with a shaped wire strut. The insert should always be set with the shear strut in the direction of the pull. Note that for the insert to develop the posted working loads, the insert must be setback 1/2″ from the concrete surface. Plywood cutouts or stacked cut washers can be utilized as setback spacers. The Edge Lift Insert – Double is available in 3/4″ and 1” bolt diameters and lengths shown in the table and is available in plain, hot dip galvanize, or stainless steel finish.

WARNING: If concrete over insert fails, wire struts may break resulting in loss of panel.