HF-39 90º/90º Broach Hanger

The HF-39, 90º/90º, Broach Hanger is made with .440 diameter wire and fabricated to job specifications. The actual width is made 1/2 in. longer than the measured beam width to accommodate the bends in the wire hanger. The rod ends are threaded with 1/2 coil thread. The HF-39 has an anti-turn wire welded in the center of the hanger. It provides also a standard 1 in. breakback. Also available as a 15º/15º hanger.

Caution: Hangers must be equally loaded on both sides. Nuts Sold Separately.

Performance Data