HF-67 Bulb Tee Hanger

The HF-67 is designed for application on thin flange Bulb Tee beams and has a 6M Safe Work Load. A special bearing plate is welded to the 45º end which moves the bearing point back from the flange edge and allows a larger load to be carried by the concrete.

Caution: If concrete beams have been produced without coil rod anchors installed, user must drill hole and epoxy grout a coil rod anchor in place. Any coil rod that is not perpendicular may be bent by slipping a pipe over the coil rod and bending in the desired direction. Do not bend if more than 20º alignment correction is necessary. If more than 20º correction is required, drill for new coil rod anchor (see Bridge Hanger Repair Procedure, Page 60).

Performance Data