Rapid Lift RL-23 Spread Anchor

2-Ton, 4-Ton, 8-Ton and 22-Ton

The RL-23 Spread Anchor is designed with a spread-foot that produces exceptional pull out capacity. This versatile anchor can be used in the face, back or edge of panels for back stripping and rotation from horizontal to vertical. This anchor can be pulled in any direction as long as minimum edge distance is maintained. However spalling may occur when pulling in shear perpendicular to the long side of the void. A minimum 3/4” concrete cover below the anchor is recommended. The Spread Anchor is available in the sizes shown in the table and in plain or hot dip galvanize finish.

NOTE: The spread anchor has allowable face shear loads that are equal to or greater than the face tension loads for anchors located in a panel or concrete unit at a distance of 3B+A from the edge. In order to achieve these loads, shear has to be applied parallel to long side of void.

Performance Data